Explanation to Bollinger's Bands

Bollinger Bands was created by John Bollinger in the early 1980s, its purpose is to define price action relative to the assets highs and lows. This technical indicator is used to identify buy and sell signals and has proven very well in doing so.

Bollinger Bands consist of a set of three curves drawn in relation to securities prices. The middle band is a measure of the intermediate-term trend, usually a simple moving average, that serves as the base for the upper and lower bands. The interval between the upper and lower bands and the middle band is determined by volatility, typically the standard deviation of the same data that were used for the average. StockInvest.us uses Bollingers suggested 20 day average.

Middle Bollinger Band = 20-period simple moving average
Upper Bollinger Band = Middle Bollinger Band + 2 * 20-period standard deviation
Lower Bollinger Band = Middle Bollinger Band - 2 * 20-period standard deviation

BandWidth defines the current width of the band.
%b defines the current position within the band.

BandWidth = (Upper Bollinger Band - Lower Bollinger Band) / Middle Bollinger Band
%b = (Last - Lower Bollinger Band) / (Upper Bollinger Band - Lower Bollinger Band)

Live Samples:

Bollinger Bottleneck Buy Pattern 1
Bollinger Bottleneck Buy Pattern 2
Bollinger Bottleneck Sell Pattern

Bottlenecks in bandwidth indicate an upcoming change. Break up through the moving average line or continuous movements above the moving average line indicate a break up, and vice versa.

Source: http://www.bollingerbands.com

RSI low/high Values: [ 25 - 75 ]
* StockInvest.us uses dynamically calculated RSI max/min levels to determine when stock is oversold or overbought based on historical behavior.
AI Analysis of 000410.SZ
Powered by GPT-4o
Upgraded!
Stock Analysis
Risk Assessment
Trading Strategy

Red day on Wednesday for Shenyang Machine Tool Co. Ltd stock after losing 0.332%
(Updated on Jul 03, 2024)

Sell candidate since Jun 12, 2024 Loss -6.53% PDF

The Shenyang Machine Tool Co. Ltd stock price fell by -0.332% on the last day (Wednesday, 3rd Jul 2024) from ¥6.03 to ¥6.01. During the last trading day the stock fluctuated 2.68% from a day low at ¥5.98 to a day high of ¥6.14. The price has fallen in 7 of the last 10 days and is down by -5.5% for this period. Volume fell on the last day along with the stock, which is actually a good sign as volume should follow the stock. On the last day, the trading volume fell by -665 thousand shares and in total, 2 million shares were bought and sold for approximately ¥12.59 million.

The stock lies in the middle of a wide and falling trend in the short term and further fall within the trend is signaled. Given the current short-term trend, the stock is expected to fall -16.59% during the next 3 months and, with a 90% probability hold a price between ¥4.73 and ¥5.49 at the end of this 3-month period. Do note, that if the stock price manages to stay at current levels or higher, our prediction target will start to change positively over the next few days as the conditions for the current predictions will be broken.

Ready to grow your portfolio? Here's your beginner's guide to opening a free brokerage account.

000410.SZ Signals & Forecast

Furthermore, there is a buy signal from the 3 month Moving Average Convergence Divergence (MACD). Some negative signals were issued as well, and these may have some influence on the near short-term development. The Shenyang Machine Tool Co. Ltd stock holds sell signals from both short and long-term Moving Averages giving a more negative forecast for the stock. Also, there is a general sell signal from the relation between the two signals where the long-term average is above the short-term average. On corrections up, there will be some resistance from the lines at ¥6.10 and ¥6.60. A break-up above any of these levels will issue buy signals. A sell signal was issued from a pivot top point on Wednesday, June 26, 2024, and so far it has fallen -3.53%. Further fall is indicated until a new bottom pivot has been found. Volume fell together with the price during the last trading day and this reduces the overall risk as volume should follow the price movements.

Buy
Special Signal Notification

Double Bottom Formation

Double Bottom Formation

Support, Risk & Stop-loss for Shenyang Machine Tool Co. Ltd stock

There is no support from accumulated volume below today's level and given the right condition the stock may perform very badly in the next couple of days.

This stock has average movements during the day and with good trading volume, the risk is considered to be medium. During the last day, the stock moved ¥0.160 between high and low, or 2.68%. For the last week, the stock has had daily average volatility of 2.36%.

Our recommended stop-loss: We hold a negative evaluation for this stock. No stop-loss is set.

Trading Expectations (000410.SZ) For The Upcoming Trading Day Of Friday 5th

For the upcoming trading day on Friday, 5th we expect Shenyang Machine Tool Co. Ltd to open at ¥6.04, and during the day (based on 14 day Average True Range), to move between ¥5.80 and ¥6.22, which gives a possible trading interval of +/-¥0.213 (+/-3.55%) up or down from last closing price. If Shenyang Machine Tool Co. Ltd takes out the full calculated possible swing range there will be an estimated 7.10% move between the lowest and the highest trading price during the day.

With no support below and resistance from accumulated volume @ ¥6.84, some ¥0.83 (13.81%) from the current price of ¥6.01, our system finds the risk reward not very attractive.

Is Shenyang Machine Tool Co. Ltd stock A Buy?

Shenyang Machine Tool Co. Ltd holds several negative signals and is within a wide and falling trend, so we believe it will still perform weakly in the next couple of days or weeks. We therefore hold a negative evaluation of this stock.

Current score: -3.170 Sell Candidate Unchanged

Predicted Opening Price for Shenyang Machine Tool Co. Ltd of Friday, July 5, 2024

Fair opening price July 5, 2024 Current price
¥6.04 ( 0.555%) ¥6.01

The predicted opening price is based on yesterday's movements between high, low, and closing price.

Trading levels for 000410.SZ

Fibonacci Support & Resistance Levels

Level Price
R3 6.20 3.22%
R2 6.14 2.20%
R1 6.10 1.57%
Price 6.01
S1 5.98 -0.462%
S2 5.94 -1.09%
S3 5.88 -2.11%

Accumulated Volume Support & Resistance Levels

Level Price
R3 7.39 22.96%
R2 7.16 19.13%
R1 6.84 13.81%
Price 6.01
S1 0 -
S2 0 -
S3 0 -

000410 Dividend Payout History


# Declaration Date Ex-Date Pay Date Amount Yield
1 Jun 05, 2015 Jun 05, 2015 Jun 05, 2015 ¥0.0094 0.0541%
2 May 23, 2012 May 23, 2012 May 23, 2012 ¥0.0283 0.713%
3 Apr 06, 2007 Apr 06, 2007 Apr 06, 2007 ¥0.0147 0.154%
4 Aug 13, 2001 Aug 13, 2001 Aug 13, 2001 ¥0.0044 0.209%

FAQ

What is the symbol for Shenyang Machine Tool Co. Ltd Stock and on which exchange is it traded?
The symbol for Shenyang Machine Tool Co. Ltd is 000410.SZ and it is traded on the SZCE (Shenzhen Stock Exchange).

Should I buy or sell Shenyang Machine Tool Co. Ltd Stock?
Shenyang Machine Tool Co. Ltd holds several negative signals and is within a wide and falling trend, so we believe it will still perform weakly in the next couple of days or weeks. We therefore hold a negative evaluation of this stock.

How to buy Shenyang Machine Tool Co. Ltd Stock?
Shenyang Machine Tool Co. Ltd Stock can be purchased through just about any brokerage firm, including online brokerage services.
Click here for our free guide on how to buy Shenyang Machine Tool Co. Ltd Stock.

What's the current price of Shenyang Machine Tool Co. Ltd Stock?
As of the end of day on the Jul 03, 2024, the price of an Shenyang Machine Tool Co. Ltd (000410.SZ) share was ¥6.01.

What is the 52-week high and low for Shenyang Machine Tool Co. Ltd Stock?
The 52-week high for Shenyang Machine Tool Co. Ltd Stock is ¥8.56 and the 52-week low is ¥5.25.

What is the market capitalization of Shenyang Machine Tool Co. Ltd Stock?
As of the Jul 03, 2024, the market capitalization of Shenyang Machine Tool Co. Ltd is 12.409B.

When is the next earnings date for Shenyang Machine Tool Co. Ltd?
The upcoming earnings date for Shenyang Machine Tool Co. Ltd is May 09, 2025.
Click to get the best stock tips daily for free!

About Shenyang Machine Tool Co. Ltd

Shenyang Machine Tool Co. Ltd Shenyang Machine Tool Co., Ltd. engages in the manufacturing and sale of machine tools and equipment in China. Its products include horizontal and vertical lathes, and turning and milling centers; and special machineries. The company was founded in 1993 and is headquartered in Shenyang, China.... 000410.SZ Profile

Top Fintech Company

StockInvest.us featured in The Global Fintech Index 2020 as the top Fintech company of the country.

Full report by FINDEXABLE

ROCKIT